Stainless Steel 420 Spring Pin, 5/32" Diameter, 5/8" Length (Pack of 100)

Stainless Steel 420 Spring Pin, 5/32" Diameter, 5/8" Length (Pack of 100) Reviews

Other Picture

Stainless Steel 420 Spring Pin, 5/32" Diameter, 5/8" Length (Pack of 100) Feature

• Installed by two easy operations, just drill and drive
• Type 420 Stainless Steel is stronger than 18-8 stainless steel and more corrosion resistant than zinc-plated and plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Type 420 Stainless Steel.Stronger than 18-8 stainless steel, more corrosion resistant than zinc-plated and plain steel. Magnetic. Minimum Rockwell hardness is C43. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Spring Pin, 3/16" Diameter, 1-1/2" Length (Pack of 100)
• Carbon Steel Spring Pin, 7/32" Diameter, 2-1/4" Length (Pack of 50)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Steel Cotter Pin, 1/8" Diameter, 2" Length (Pack of 500)
• Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, #10-32, 1" Length (Pack of 10)

Detail Reviews

Jun 30, 2011 04:41:06

Carbon Steel Spring Pin, 3/32" Diameter, 1-1/4" Length (Pack of 500)

Carbon Steel Spring Pin, 3/32" Diameter, 1-1/4" Length (Pack of 500) Reviews

Other Picture

Carbon Steel Spring Pin, 3/32" Diameter, 1-1/4" Length (Pack of 500) Feature

• Installed by two easy operations, just drill and drive
• Carbon Steel is stronger than 18-8 stainless steel and just as strong as Type 420 stainless steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel.. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Spring Pin, 3/16" Diameter, 1-1/2" Length (Pack of 100)
• Stainless Steel 420 Spring Pin, 3/32" Diameter, 1" Length (Pack of 100)
• Steel Cotter Pin, 1/8" Diameter, 2" Length (Pack of 500)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #4-40, 3/8" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 1/4"-20, 1-3/4" Length (Pack of 100)

Detail Reviews

Jun 29, 2011 04:05:06

.438 dia. (A), .197 dia. (B), .236 (C), .472 (D), 4.5 lbs. (P), Plastic Pin, w/Seal, Installation Tool - JLP-405, Spring Locating Pin (1 Each)

.438 dia. (A), .197 dia. (B), .236 (C), .472 (D), 4.5 lbs. (P), Plastic Pin, w/Seal, Installation Tool - JLP-405, Spring Locating Pin (1 Each) Reviews

Other Picture

These spring locating pins are designed for fixturing small parts in tight or compact space. Ideal for positioning and chucking flat parts and round parts for profile clamping. Bodies are made of aluminum and are available with steel, stainless steel or plastic pins. Steel pins are case hardened and zinc coated. Plastic pins are made of delrin. Steel and plastic pin locators with seal have steel springs. Stainless locators with seal have Type 304 stainless pin with cast nylon spring and aluminum body. Available with or without seals. Pins with no seal have neoprene inside rather than a spring. Pins with seal recommended for applications involving any fluid or liquid. Installation tools and liners sold separately below.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 28, 2011 07:56:06

1/16 Dia., 3/8 Lg., Spring Pins, Steel (1 Each)

1/16 Dia., 3/8 Lg., Spring Pins, Steel (1 Each) Reviews

Other Picture

Steel are high carbon, Rockwell C46-53. Stainless are Type 420, Rockwell C46-52.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 26, 2011 19:58:03

Carbon Steel Spring Pin, 1/2" Diameter, 1-1/2" Length (Pack of 50)

Carbon Steel Spring Pin, 1/2" Diameter, 1-1/2" Length (Pack of 50) Reviews

Other Picture

Carbon Steel Spring Pin, 1/2" Diameter, 1-1/2" Length (Pack of 50) Feature

• Installed by two easy operations, just drill and drive
• Carbon Steel is stronger than 18-8 stainless steel and just as strong as Type 420 stainless steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel.. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Spring Pin, 3/16" Diameter, 1-1/2" Length (Pack of 100)
• Stainless Steel 420 Spring Pin, 3/32" Diameter, 1/4" Length (Pack of 100)
• Steel Cotter Pin, 1/8" Diameter, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, #10-24, 1-3/4" Length (Pack of 100)

Detail Reviews

Jun 25, 2011 10:43:05

Carbon Steel Spring Pin, 3/16" Diameter, 15/16" Length (Pack of 250)

Carbon Steel Spring Pin, 3/16" Diameter, 15/16" Length (Pack of 250) Reviews

Other Picture

Carbon Steel Spring Pin, 3/16" Diameter, 15/16" Length (Pack of 250) Feature

• Installed by two easy operations, just drill and drive
• Carbon Steel is stronger than 18-8 stainless steel and just as strong as Type 420 stainless steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel.. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Spring Pin, 3/16" Diameter, 1-1/2" Length (Pack of 100)
• Stainless Steel 420 Spring Pin, 3/32" Diameter, 1/4" Length (Pack of 100)
• Steel Cotter Pin, 1/8" Diameter, 2" Length (Pack of 500)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, #10-24, 1-3/4" Length (Pack of 100)

Detail Reviews

Jun 23, 2011 21:11:03

.625 dia. (A), .394 dia. (B), .654 (C), .625 (D), 35.0 lbs. (P), Steel Pin, No Seal, Installation Tool - JLP-420, Spring Locating Pin (1 Each)

.625 dia. (A), .394 dia. (B), .654 (C), .625 (D), 35.0 lbs. (P), Steel Pin, No Seal, Installation Tool - JLP-420, Spring Locating Pin (1 Each) Reviews

Other Picture

These spring locating pins are designed for fixturing small parts in tight or compact space. Ideal for positioning and chucking flat parts and round parts for profile clamping. Bodies are made of aluminum and are available with steel, stainless steel or plastic pins. Steel pins are case hardened and zinc coated. Plastic pins are made of delrin. Steel and plastic pin locators with seal have steel springs. Stainless locators with seal have Type 304 stainless pin with cast nylon spring and aluminum body. Available with or without seals. Pins with no seal have neoprene inside rather than a spring. Pins with seal recommended for applications involving any fluid or liquid. Installation tools and liners sold separately.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 22, 2011 17:51:04

Zinc Plated Steel Spring Pin, 1/4" Diameter, 7/8" Length (Pack of 100)

Zinc Plated Steel Spring Pin, 1/4" Diameter, 7/8" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Spring Pin, 1/4" Diameter, 7/8" Length (Pack of 100) Feature

• Installed by two easy operations, just drill and drive
• Zinc-plated steel is more rust resistant than plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 5/8" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #8-32, 1/2" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, #10-24, 1-3/4" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, #10-24, 7/8" Length (Pack of 25)

Detail Reviews

Jun 21, 2011 22:50:07

Zinc Plated Steel Spring Pin, 1/8" Diameter, 5/8" Length (Pack of 250)

Zinc Plated Steel Spring Pin, 1/8" Diameter, 5/8" Length (Pack of 250) Reviews

Other Picture

Zinc Plated Steel Spring Pin, 1/8" Diameter, 5/8" Length (Pack of 250) Feature

• Installed by two easy operations, just drill and drive
• Zinc-plated steel is more rust resistant than plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 5/8" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #8-32, 1/2" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, #10-24, 1-3/4" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, #10-24, 7/8" Length (Pack of 25)

Detail Reviews

Jun 21, 2011 03:12:03

Zinc Plated Steel Spring Pin, 1/4" Diameter, 1/2" Length (Pack of 100)

Zinc Plated Steel Spring Pin, 1/4" Diameter, 1/2" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Spring Pin, 1/4" Diameter, 1/2" Length (Pack of 100) Feature

• Installed by two easy operations, just drill and drive
• Zinc-plated steel is more rust resistant than plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 5/8" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #8-32, 1/2" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 1/4"-28, 5/8" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, #10-24, 7/8" Length (Pack of 25)

Detail Reviews

Jun 20, 2011 03:31:04

1/4 Dia., 1 1/2 Lg., Spring Pins, Stainless Steel (1 Each)

1/4 Dia., 1 1/2 Lg., Spring Pins, Stainless Steel (1 Each) Reviews

Other Picture

Steel are high carbon, Rockwell C46-53. Stainless are Type 420, Rockwell C46-52.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 19, 2011 05:29:04

.625 dia. (A), .394 dia. (B), .625 (C), .709 (D), 67.5 lbs. (P), Steel Pin, w/Seal, Installation Tool - JLP-420, Spring Locating Pin (1 Each)

.625 dia. (A), .394 dia. (B), .625 (C), .709 (D), 67.5 lbs. (P), Steel Pin, w/Seal, Installation Tool - JLP-420, Spring Locating Pin (1 Each) Reviews

Other Picture

These spring locating pins are designed for fixturing small parts in tight or compact space. Ideal for positioning and chucking flat parts and round parts for profile clamping. Bodies are made of aluminum and are available with steel, stainless steel or plastic pins. Steel pins are case hardened and zinc coated. Plastic pins are made of delrin. Steel and plastic pin locators with seal have steel springs. Stainless locators with seal have Type 304 stainless pin with cast nylon spring and aluminum body. Available with or without seals. Pins with no seal have neoprene inside rather than a spring. Pins with seal recommended for applications involving any fluid or liquid. Installation tools and liners sold separately.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 17, 2011 03:37:04

.500 dia. (A), .315 dia. (B), .512 (C), .551 (D), 11.2 lbs. (P), Plastic Pin, w/Seal, Installation Tool - JLP-415, Spring Locating Pin (1 Each)

.500 dia. (A), .315 dia. (B), .512 (C), .551 (D), 11.2 lbs. (P), Plastic Pin, w/Seal, Installation Tool - JLP-415, Spring Locating Pin (1 Each) Reviews

Other Picture

These spring locating pins are designed for fixturing small parts in tight or compact space. Ideal for positioning and chucking flat parts and round parts for profile clamping. Bodies are made of aluminum and are available with steel, stainless steel or plastic pins. Steel pins are case hardened and zinc coated. Plastic pins are made of delrin. Steel and plastic pin locators with seal have steel springs. Stainless locators with seal have Type 304 stainless pin with cast nylon spring and aluminum body. Available with or without seals. Pins with no seal have neoprene inside rather than a spring. Pins with seal recommended for applications involving any fluid or liquid. Installation tools and liners sold separately below.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 16, 2011 05:40:06