3/8 Dia., 3 1/2 Lg., Spring Pins, Steel (1 Each)

3/8 Dia., 3 1/2 Lg., Spring Pins, Steel (1 Each) Reviews

Other Picture

Steel are high carbon, Rockwell C46-53. Stainless are Type 420, Rockwell C46-52.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 01, 2011 10:39:06

Carbon Steel Spring Pin, 3/8" Diameter, 3/4" Length (Pack of 50)

Carbon Steel Spring Pin, 3/8" Diameter, 3/4" Length (Pack of 50) Reviews

Other Picture

Carbon Steel Spring Pin, 3/8" Diameter, 3/4" Length (Pack of 50) Feature

• Installed by two easy operations, just drill and drive
• Carbon Steel is stronger than 18-8 stainless steel and just as strong as Type 420 stainless steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel.. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Spring Pin, 5/64" Diameter, 5/16" Length (Pack of 250)
• Stainless Steel 420 Spring Pin, 5/64" Diameter, 3/4" Length (Pack of 100)
• Steel Cotter Pin, 7/16" Diameter, 4" Length (Pack of 5)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 5/16"-18, 2" Length (Pack of 25)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-18, 1" Length (Pack of 25)

Detail Reviews

Feb 28, 2011 12:19:04

Zinc Plated Steel Spring Pin, 3/16" Diameter, 1-3/4" Length (Pack of 100)

Zinc Plated Steel Spring Pin, 3/16" Diameter, 1-3/4" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Spring Pin, 3/16" Diameter, 1-3/4" Length (Pack of 100) Feature

• Installed by two easy operations, just drill and drive
• Zinc-plated steel is more rust resistant than plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-18, 1" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 3/8" Length (Pack of 100)
• Carbon Steel Spring Pin, 3/16" Diameter, 7/8" Length (Pack of 250)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #8-32, 7/16" Length (Pack of 100)

Detail Reviews

Feb 27, 2011 15:26:05

7/32X1 1/4 Tension (Spring) Pin (25 count)

7/32X1 1/4 Tension (Spring) Pin (25 count) Reviews

Other Picture

7/32X1 1/4 Tension (Spring) Pin

Visit Store Now !!

Detail Products

Detail Reviews

Feb 26, 2011 17:58:04

Carbon Steel Spring Pin, 7/32" Diameter, 1-1/8" Length (Pack of 100)

Carbon Steel Spring Pin, 7/32" Diameter, 1-1/8" Length (Pack of 100) Reviews

Other Picture

Carbon Steel Spring Pin, 7/32" Diameter, 1-1/8" Length (Pack of 100) Feature

• Installed by two easy operations, just drill and drive
• Carbon Steel is stronger than 18-8 stainless steel and just as strong as Type 420 stainless steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel.. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Spring Pin, 5/64" Diameter, 5/16" Length (Pack of 250)
• Stainless Steel 420 Spring Pin, 5/64" Diameter, 3/4" Length (Pack of 100)
• Steel Cotter Pin, 7/16" Diameter, 4" Length (Pack of 5)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 5/16"-18, 2" Length (Pack of 25)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-18, 1" Length (Pack of 25)

Detail Reviews

Feb 25, 2011 05:27:04

Zinc Plated Steel Spring Pin, 7/32" Diameter, 1-1/2" Length (Pack of 100)

Zinc Plated Steel Spring Pin, 7/32" Diameter, 1-1/2" Length (Pack of 100) Reviews

More Picture

Zinc Plated Steel Spring Pin, 7/32" Diameter, 1-1/2" Length (Pack of 100) Feature

• Installed by two easy operations, just drill and drive
• Zinc-plated steel is more rust resistant than plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Go tO Store Now !!

More Products

• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-18, 1" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 3/8" Length (Pack of 100)
• Carbon Steel Spring Pin, 3/16" Diameter, 7/8" Length (Pack of 250)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #8-32, 7/16" Length (Pack of 100)

More Reviews

Feb 23, 2011 14:28:04

Zinc Plated Steel Spring Pin, 7/16" Diameter, 2-1/2" Length (Pack of 10)

Zinc Plated Steel Spring Pin, 7/16" Diameter, 2-1/2" Length (Pack of 10) Reviews

More Picture

Zinc Plated Steel Spring Pin, 7/16" Diameter, 2-1/2" Length (Pack of 10) Feature

• Installed by two easy operations, just drill and drive
• Zinc-plated steel is more rust resistant than plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Go tO Store Now !!

More Products

• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-18, 1" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 3/8" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.275" OD, 0.125" Thick, 0.400" Shoulder Diameter, 0.25" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #8-32, 7/16" Length (Pack of 100)

More Reviews

Feb 22, 2011 13:12:04

Stainless Steel 420 Spring Pin, 5/32" Diameter, 3/4" Length (Pack of 100)

Stainless Steel 420 Spring Pin, 5/32" Diameter, 3/4" Length (Pack of 100) Reviews

More Picture

Stainless Steel 420 Spring Pin, 5/32" Diameter, 3/4" Length (Pack of 100) Feature

• Installed by two easy operations, just drill and drive
• Type 420 Stainless Steel is stronger than 18-8 stainless steel and more corrosion resistant than zinc-plated and plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Type 420 Stainless Steel.Stronger than 18-8 stainless steel, more corrosion resistant than zinc-plated and plain steel. Magnetic. Minimum Rockwell hardness is C43. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Go tO Store Now !!

More Products

• Carbon Steel Spring Pin, 3/16" Diameter, 7/8" Length (Pack of 250)
• Zinc Plated Steel Spring Pin, 5/64" Diameter, 5/16" Length (Pack of 250)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 3/8" Length (Pack of 100)
• Steel Cotter Pin, 7/16" Diameter, 4" Length (Pack of 5)
• Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, #6-32, 3/4" Length (Pack of 10)

More Reviews

Feb 21, 2011 14:58:04

Stainless Steel 420 Spring Pin, 1/2" Diameter, 1-1/2" Length (Pack of 10)

Stainless Steel 420 Spring Pin, 1/2" Diameter, 1-1/2" Length (Pack of 10) Reviews

More Picture

Stainless Steel 420 Spring Pin, 1/2" Diameter, 1-1/2" Length (Pack of 10) Feature

• Installed by two easy operations, just drill and drive
• Type 420 Stainless Steel is stronger than 18-8 stainless steel and more corrosion resistant than zinc-plated and plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Type 420 Stainless Steel.Stronger than 18-8 stainless steel, more corrosion resistant than zinc-plated and plain steel. Magnetic. Minimum Rockwell hardness is C43. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Go tO Store Now !!

More Products

• Carbon Steel Spring Pin, 3/16" Diameter, 7/8" Length (Pack of 250)
• Zinc Plated Steel Spring Pin, 5/64" Diameter, 5/16" Length (Pack of 250)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 3/8" Length (Pack of 100)
• Steel Cotter Pin, 7/16" Diameter, 4" Length (Pack of 5)
• Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, #6-32, 3/4" Length (Pack of 10)

More Reviews

Feb 20, 2011 19:16:14

Zinc Plated Steel Spring Pin, 5/64" Diameter, 5/16" Length (Pack of 250)

Zinc Plated Steel Spring Pin, 5/64" Diameter, 5/16" Length (Pack of 250) Reviews

More Picture

Zinc Plated Steel Spring Pin, 5/64" Diameter, 5/16" Length (Pack of 250) Feature

• Installed by two easy operations, just drill and drive
• Zinc-plated steel is more rust resistant than plain steel
• Superior to and used in place of drive pins, taper pins, collar pins, etc.
• Permit a wider tolerance because of the flexibility
• Tapered ends make starting easy

Also referred to as Roll, Tension and Expansion Pins. Hollow and slotted lengthwise to create tension, these self retaining Spring Pins are made of Carbon Steel which is stronger than 18-8 stainless steel; just as strong as Type 420 stainless steel. Zinc-plated steel is more rust resistant than plain steel. They are installed by two easy operations, just drill and drive. Useful for many purposes, including electrical connectors in patch board circuits, terminals, fixtures for wire harness, actuators for drum, to secure pulley or gear to shaft, hinges, positioning, studs and many others. Superior to and used in place of drive pins, taper pins, collar pins, etc. They permit a wider tolerance because of the flexibility. Tapered ends make starting easy.

Go tO Store Now !!

More Products

• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 1/2"-20, 1-3/4" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #2-56, 1/8" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.124" ID, 0.219" OD, 0.031" Thick, 0.313" Shoulder Diameter, 0.062" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #8-32, 1/4" Length (Pack of 100)

More Reviews

Feb 19, 2011 22:23:03